Changes

Jump to: navigation, search

ASIC

17 bytes added, 00:17, 6 July 2024
/* DMA commands */

Deprecated: The each() function is deprecated. This message will be suppressed on further calls in /mnt/cpcwiki-httpdocs/includes/diff/DairikiDiff.php on line 434
A DMA control and status register (DCSR(at address 6C0Fh) controls which channels are currently enabled, and also tells the CPU which channel is interrupting:
* Bits2..0 are the channel enable bits. When set to "1" it enables the corresponding DMA channel. It can be set by the CPU, and cleared by either the CPU, a STOP instruction, or power on rest.
* Bits7..4 are the interrupt bits. An interrupt bit is set to "0" when the corresponding channel is requesting an interrupt, and cleared when the CPU writes a "1" to the appropriate bit.
Phi2x
13,173
edits
Retrieved from "https://oldwiki.cpcwiki.eu/index.php/Special:MobileDiff/117311"