Ok, you will find here the settings i use in order to transfer alkatraz protected tapes with no problems :
- Contrôle de lecture means 'read control' in english
- Wave/mp3 is easy to translate
- Synth midi too
- Microphone must be muted
- entrée de ligne means 'in-line'
Once you have done this, Please use GOLDWAVE, and check this second pictures below :
-in line must be put to 50% and used (click select)
- Now, the most top button must be put to 76%, the one below for balance to 0%, and the third to speed = 1.00
Ok, and more than everything, on your tape recorder, put the volume slider to 50,
considering the range goes from 0 to 100.
Use then *.WAV format, 44khz, 8 bits mono, and try to dump a cassette.
It should work 100 % unless you have an error on tape.