Notice: Trying to access array offset on value of type bool in /mnt/cpcwiki-httpdocs/includes/libs/IPSet.php on line 243

Notice: Trying to access array offset on value of type bool in /mnt/cpcwiki-httpdocs/includes/libs/IPSet.php on line 246

Notice: Trying to access array offset on value of type bool in /mnt/cpcwiki-httpdocs/includes/libs/IPSet.php on line 243

Notice: Trying to access array offset on value of type bool in /mnt/cpcwiki-httpdocs/includes/libs/IPSet.php on line 246
Difference between revisions of "DB-25 Printer Port Adapter" - CPCWiki
Open main menu
Last modified on 17 December 2010, at 04:49

Difference between revisions of "DB-25 Printer Port Adapter"
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
 +
[[Category:Printers and printer ports]][[Category:DIY]]
 
[[File:DB25_printer_adapter.jpg|200px|thumb|right]]
 
[[File:DB25_printer_adapter.jpg|200px|thumb|right]]
−
To use a (PC/CPC Plus-style) DB-25 printer cable on a classic CPC, an adapter is needed. This adapter can be build using a female DB-25 socket and a male Centronics plug. Using ribbon cable crimp connectors is the easiest way. Just connect each plug to the ribbon cable and pay attention that you always connect the red wire to pin 1 of the connector. Then cut pin 16 (which is the printer reset pin) using a sharp knife.
+
To use a (PC/CPC Plus-style) DB-25 printer cable on a classic CPC, an adapter is needed. This adapter can be build using a female DB-25 socket and an edge connector (or a male Centronics plug for the german Schneider CPC). Using ribbon cable crimp connectors is the easiest way. Just connect each plug to the ribbon cable and pay attention that you always connect the red wire to pin 1 of the connector. Then cut pin 16 (which is the printer reset pin) using a sharp knife.

Latest revision as of 04:49, 17 December 2010

DB25 printer adapter.jpg

To use a (PC/CPC Plus-style) DB-25 printer cable on a classic CPC, an adapter is needed. This adapter can be build using a female DB-25 socket and an edge connector (or a male Centronics plug for the german Schneider CPC). Using ribbon cable crimp connectors is the easiest way. Just connect each plug to the ribbon cable and pay attention that you always connect the red wire to pin 1 of the connector. Then cut pin 16 (which is the printer reset pin) using a sharp knife.